Yes I know I have been very remiss and missed most of April and in no time at all the weeks have flown by and no updates to read.
The simple fact is that firstly I was very busy and secondly I dropped the laptop and managed to smash the hard drive thus losing all the info etc etc. After the repair it was Stoneleigh kit car show time and I still couldn't find enough time to write even a few lines on the blog.
Anyway, the show has come and gone, the computer is repaired and work continues at a fast pace.
We have a roof on the house, the windows are now stained and protected, the walls have been rendered and painted and the scaffolding was removed on Bank holiday Monday whilst we were at the show so everything is slowly getting back to normal. Very soon I will have the wall removed from the workshop and can settle everything back down to normality.
Anyway back to Gentry news, the show was again very busy with lots of interest and enquiries we are booked up till October November time and with luck I could manage to do some more to the Police car over the winter. Trouble is that as we get closer someone else places an order and work on my car gets postponed! What a terrible position to be in!
For those that don't know I had another minor op and managed to burst open my stitches within a week or two of the op and so it has taken a while longer than expected to heal. it appears that I may need yet another procedure in an attempt to solve the issues. Great, just what you need when you are self employed and work is stacking up.
I'll try to be back in a couple of weeks, but you never know!!!!
Geoff
Sunday, 9 May 2010
Friday, 2 April 2010
Delayed update!!!

Well there's a surprise I hear you all say!!
We were away last week on the Southern Area rally. All was going great, meeting some of the Southern area members we had never met before and then the drive shaft broke! It can be very annoying at times. There are people that took their old ones out of their donor and dropped them into the Gentry. They have never had any issues from them at all!
We buy a reconditioned pair that are uprated with thicker shafts for racing purposes so that they are more than man enough for the job. 350 miles later and then fall apart!!!
Recovery courtesy of the AA and a quick strip out and examination and we find that ours has a faulty casting. The good news is that they are being replaced as clearly they are faulty, the bad news is the car has to be off the road whilst the new one arrives and then I have to find a few hours to refit and bleed the brakes.
Above right is a photo of the shaft for you to see what it looks like when the casting is faulty and it gives up on you.
Anyway onto better things. I have just collected the red Gentry from the trimmers and so we can get a first glimpse of the 'new' seats in situ. The ones in the photo's (photos will follow in the next update straight after this one) are not yet bolted into place but you get a very good idea of what they are going to look like.
They are designed to look similar to the bench seat arrangement but are actually 2 individual seats one runners so that each one will move on its own giving you the freedom to move the seat position to suit more than one driver.
We love them and if I can find the time will be changing the demonstrator seat, which is a fixed bench seat, for a pair of these.
See you all next week
Geoff
Sunday, 14 March 2010
Update Sunday 14th March
If there are any spelling mistakes at the end of this I blame the fact that I am trying to type with a broken left index finger!! Yes I know, should take more care when using the pillar drill but we have all done it. Just a small hole no need to engage brain then suddenly it's too late and you've got to make a splint out of a paint stirring stick and electrical insulation tape!
It is a straight forward break and should bring about any complications so it is just making things a little difficult but not impossible.
I have re styled the bonnet and scuttle and the new panels are in the glass fibre factory having molds made as I type (well probably not as it is 10.45pm!) They look great, are an improvement over the last ones and I can't wait to build another car and use them!
Out trip to France in September this year is gathering momentum and there are now 3 cars and 5 of us going, if anyone else wants to join in then they would be most welcome. As I've previously said it is not going to be anything strenuous as I'm looking for a break of a different kind. It will be a gentle meander around, hopefully meeting up with some of the Gentry owners that are lucky enough to reside in France all year round!
Had no takers to make a film for U Tube so I can only assume that we have no budding film makers reading the blog. Something else I'll have to get round to eventually.
I have had to hand my car over to our senior engineer Cliff to get it ready fore the Dartmoor trip as I am too busy to sort it myself!!
Anyway must go, have got to finish the bottle of red (pain killer for the finger is my excuse)
See you all in a fortnight.
Geoff
It is a straight forward break and should bring about any complications so it is just making things a little difficult but not impossible.
I have re styled the bonnet and scuttle and the new panels are in the glass fibre factory having molds made as I type (well probably not as it is 10.45pm!) They look great, are an improvement over the last ones and I can't wait to build another car and use them!
Out trip to France in September this year is gathering momentum and there are now 3 cars and 5 of us going, if anyone else wants to join in then they would be most welcome. As I've previously said it is not going to be anything strenuous as I'm looking for a break of a different kind. It will be a gentle meander around, hopefully meeting up with some of the Gentry owners that are lucky enough to reside in France all year round!
Had no takers to make a film for U Tube so I can only assume that we have no budding film makers reading the blog. Something else I'll have to get round to eventually.
I have had to hand my car over to our senior engineer Cliff to get it ready fore the Dartmoor trip as I am too busy to sort it myself!!
Anyway must go, have got to finish the bottle of red (pain killer for the finger is my excuse)
See you all in a fortnight.
Geoff
Sunday, 28 February 2010
Update Sunday 28th February
Hi Folks
Keeping busy as usual and looking forward to the coming season. I t is about that time of year when the car gets a service and you start looking forward to the sun coming out! then you get an email from Elwyn in Sweden showing me what they had over the weekend.
So whilst Canada were worrying about having enough for the Olympics it all arrived in Sweden!
Good job it didn't arrive here, it would have closed the country until about May or June.
Elwyn did send me some more photos during last summer of his car at a British car meet and if I can ever find the time I will get them put onto a gallery page on our website, if only to prove that it is not only snow in Sweden.
For some unknown reason there a a large number of Gentry's being bought and moved to France. I accept that their weather probably lends itself to driving a Gentry more than the weather in the UK but it's not ex-pats that are taking them. In the main it appears to be French residents who can appreciate the class and style of the car. Well we can all agree with that.
I also managed to speak with Roger Blockley the other day. Hopefully he will be able to get to one of our monthly meetings at the Hinckley Island and I can report back once I've caught up with him. I know I have a lot of questions I would like to ask.
Got to sign off now, Canada are playing the USA in the final of the ice hockey and I don't want to miss anything!
See you next time.
Geoff
Wednesday, 17 February 2010
Update... Late as usual
Hi Folks,
Yes I know back to my old ways!! Only just into the New Year and have already slipped into forgetting to do the update. I don't know what happened over the last few weeks, apart from lots of work, but somehow I completely forgot that an update was due. I had set the reminder on the calendar on the laptop so it should be almost impossible to forget. Then the wireless card broke and so I've been mainly using the desk top. Of course I hadn't set the reminder on the desk top and the two computers do not talk to each other!!!
Work remains exceptionally busy, which is good, we have made some very nice changes to the latest car and kit which we believe makes for a much better build and final look. If I could find the time I would build another demonstrator so that we could show them off. Only problem remains time to do it!
I will be back on the correct date with the full update.
Geoff
Yes I know back to my old ways!! Only just into the New Year and have already slipped into forgetting to do the update. I don't know what happened over the last few weeks, apart from lots of work, but somehow I completely forgot that an update was due. I had set the reminder on the calendar on the laptop so it should be almost impossible to forget. Then the wireless card broke and so I've been mainly using the desk top. Of course I hadn't set the reminder on the desk top and the two computers do not talk to each other!!!
Work remains exceptionally busy, which is good, we have made some very nice changes to the latest car and kit which we believe makes for a much better build and final look. If I could find the time I would build another demonstrator so that we could show them off. Only problem remains time to do it!
I will be back on the correct date with the full update.
Geoff
Sunday, 24 January 2010
Update Sunday 24th 'January
Hi All
I've recovered from my rantings on the last 'official' update and then dropping in the French video update nearly upset everything as I came close to forgetting to update this weekend!
Many thanks to all those who emailed me regarding the issues raised in the rant. it appears as thought I am not alone in either issue.
The house build is now making good progress, work is busy and the slight alterations we are making to the kit are coming on well. Then you are brought back to reality when an old colleague phones to inform you that another ex-colleague and friend has just died. At 55 yrs and after only 1 years retirement it makes it very clear to you were the priorities should lie. My thoughts go to Sandra and family at this difficult time. Bob was a friend from way back and will be missed by all those who knew him.
Did you enjoy the French video? I did, even though my French is very poor. Elwyn, to answer your question, I believe that most of the photographs used in the video clip were taken at Stoneleigh, probably at the kit car show. At the time, we were using Digby as our car and would have put it on the club stand.
See you in a fortnight.
Geoff
I've recovered from my rantings on the last 'official' update and then dropping in the French video update nearly upset everything as I came close to forgetting to update this weekend!
Many thanks to all those who emailed me regarding the issues raised in the rant. it appears as thought I am not alone in either issue.
The house build is now making good progress, work is busy and the slight alterations we are making to the kit are coming on well. Then you are brought back to reality when an old colleague phones to inform you that another ex-colleague and friend has just died. At 55 yrs and after only 1 years retirement it makes it very clear to you were the priorities should lie. My thoughts go to Sandra and family at this difficult time. Bob was a friend from way back and will be missed by all those who knew him.
Did you enjoy the French video? I did, even though my French is very poor. Elwyn, to answer your question, I believe that most of the photographs used in the video clip were taken at Stoneleigh, probably at the kit car show. At the time, we were using Digby as our car and would have put it on the club stand.
See you in a fortnight.
Geoff
Subscribe to:
Posts (Atom)

